

Built-in thermal insulation of three-layered elements is continuous, so the façade can be done without thermal bridges.
Dimensions of cross-sections of three-layered façade elements usually total thickness of 23 cmv(external RC wall 6cm, thermal insulation layer 8cm, internal load-bearing layer 9cm), but they can also have different dimensions. Three-layered façade elements can be installed horizontally or vertically. If they are horizontal, max. height is 3.10m, and max. length is 10m. If they are vertical, max. length is 3.10m and max. height is 10 m, which are the limitations of the manufacturing table.
The three-layered elements are produced filled or with openings for windows and doors.
Walls of the three-layered façade elements are connected with stainless steel clamps, and are attached to load-bearing structure of pillars or beams using stainless steel Halfen channels and stainless steel hinges or angles and screws.
Finishing can be done in natural concrete, colour concrete, painted concrete or stone cladding incorporated into fresh concrete of the external layer in the factory.
They hang over the stainless steel suspenders on the load-bearing structure or are supported against the structure using short consoles.
Finishing can be done in natural concrete, colour concrete, painted concrete and terrazzo.
Made from lightweight concrete, 16 cm thick, arranged one on top of the other in the form of a wall, joined together using dowels, whereas for a load-bearing structure of pillars or beams, they are joined using Halfen stainless steel connectors.
Finishing can be done in natural concrete, colour concrete, painted concrete or stone cladding incorporated into fresh concrete of the external layer in the factory.
Puškarićeva 1b, 10250 Lučko
Tel: +385 (0)1 6599 700
Fax: +385 (0)1 6530 070
Email: info@betonlucko.hr
Cash and cards